Aerolite is a pink, high quality, Glasswool thermal & acoustic ceiling insulation that is bonded with an inert, thermosetting resin. The strong, resilient, flexible blankets are supplied in compression packed rolls and are easy to cut and install.

QUALITY MANAGEMENT SYSTEM
Isover products are manufactured according to ISO 9001:2000.

ENVRONMENTAL SUSTAINABILITY
Isover products are manufactured according to ISO 14001:2004.
Less material, less energy and less emissions

- Zero ozone depleting potential (ODP)
- Zero global warming potential (GWP)

FEATURES & BENEFITS

    Life long energy savings
    Lightweight & easy to install
    Exceptional thermal and acoustic properties
    Safe application and use
    Maintenance free
    Long product life - will not readily age
    SABS mark (SABS 1381 part 1)
    Compression packed to reduce volume & optimise transport and storage

FIRE PROPERTIES

    Non-combustible-tested to SANS 10177 Part 5
    Class 1 fire index rating-SANS 10177 Part 3
    Class A1, s1, do according to EN 13823
    EUROCLASS A1 as per EN 13501-1

THERMAL PROPERTIES
Contributes to indoor comfort & contributes to lifelong savings by reducing heat loss/gain due to its inherent thermal insulation properties.

ACOUSTIC PROPERTIES
Offers exceptional acoustic properties & enhances indoor environmental quality by absorption of noise. Aerolite ceiling insulation reduces the sound transmission to and from a room.

APPLICATIONS
Ceiling insulation in:

    Residential buildings
    Retrofit in existing homes
    Top up insulation
    Non-residential buildings

DURABILITY

    Odourless, inert & fully compatible with all standard building materials & components
    Will not promote corrosion of steel, copper or aluminium
    Will not sustain vermin
    Will not breed or promote fungi, mould or bacteria
    Non-hygroscopic
    Dust settlement will not hamper the product’s performance

PHYSICAL PROPERTIES

TOOLS NEEDED FOR INSTALLATION
A wood saw, tape measure & a balancing plank (to prevent ceiling damage).

INSTALLATION INSTRUCTIONS

        Measure the distance between the timber roof trusses.

    Cut the Aerolite while still in the bag to the correct width to snugly fit the space between the roof trusses.
    Roll out the Aerolite between the roof trusses on top of the ceiling.
    It is advisable to lay the Aerolite underneath any wiring and to cut around any down lights to prevent overheating of light fitting.
    Wrap off-cuts around pipes to prevent them freezing in winter.

WARNING: Be careful not to step onto the ceiling board as you may damage the board or fall through the ceiling.

HANDLING & STORAGE
Store product undercover, and in dry conditions. Store flat. Handle with care, especially on the edges and corners, which can be damaged if subject to sharp or heavy impact. Do not apply excessive pressure, for example by standing or sitting on the product, as permanent damage may be caused.

ARCHITECTURAL SPECIFICATION
Install (50/75/100/115/135)mm thick flexible non-combustible light weight “Aerolite” insulation material between the roof trusses & over brandering/purlins in a completed roof & ceiling system. Installation strictly in accordance with the manufacturer’s detail & specification.